RAPTOR ROOFING & CONSTRUCTION LTD
Your roof is showing signs of failure — a damp patch, a slipped tile or water in the loft. We find the source, stop the leak and repair the weatherproofing so the problem doesn’t return. We explain what caused the issue, outline sensible repair options and agree the next step with you before any work begins.
AN INTRODUCTION / 02
Spotting a stain on a ceiling, hearing water during rain or seeing missing tiles means action matters. We diagnose the defect and restore the roof’s waterproof layers so water cannot reach the structure or internal finishes.
A leaking roof or slipped tiles requires stopping water entering the building first, then repairing the cause. We inspect externally where it’s safe and internally in the loft or affected rooms to trace water back to its origin. After diagnosis we set out repair options, the materials we would use and any access or scaffold needs so you can decide. Where carpentry, brickwork or work beyond the roof covering is required we explain that clearly and show how we coordinate those trades.
EXPLORE THE OPTIONSOUR SERVICES / 02
Faced with a leaking, storm-damaged or slipped-tile roof, we carry out repairs aimed at restoring the covering and junction seals. We look for hidden leaks, make roofs watertight and replace damaged tiles, slates or flashings. Where guttering, fascias or soffits affect the leak we include those items in the scope; send photos and your postcode so we can suggest the right next step for your Highgate property.
Noticed missing or cracked tiles, minor leaks or early signs of wear? We inspect the covering and edges, identify damaged components and replace or secure them to restore weatherproofing. We document findings, recommend only the repairs that address the cause and advise if further building work beyond the roof covering will be required.
ENQUIRE ABOUT THIS SERVICEAfter sudden damage that allows water into the building we make safe, temporary watertight measures and then plan permanent repairs. That often means tarpaulin or boarding to limit internal damage, followed by replacement of slipped tiles, damaged battens or compromised flashings. We won’t ask you to climb onto a damaged roof; we advise on safe temporary protection until the repair is agreed.
ENQUIRE ABOUT THIS SERVICELocating the true entry point is the priority when water appears inside, since leaks can travel along timbers. We inspect loft spaces, ceilings and roof junctions, test suspected routes and then repair or replace the failed elements — whether slipped tiles, damaged flashing or failing underlay — to restore a continuous watertight layer.
ENQUIRE ABOUT THIS SERVICEStorm-damaged roofs where wind or debris has displaced tiles, cracked slates or damaged flashings need loose components secured, broken tiles replaced and flashings renewed where required. We assess adjoining elements such as verges and hips for hidden damage and propose repairs that stop further water ingress while avoiding unnecessary replacement of sound areas.
ENQUIRE ABOUT THIS SERVICEReplacing broken, slipped or cracked tiles and slates is a specialist task. We match replacements where possible, fix tiles to secure battens or clips and re-bed ridge tiles or hip tiles when needed to restore visual continuity and weatherproofing. If batten or felt condition is poor we explain the options and the implications for repair longevity.
ENQUIRE ABOUT THIS SERVICEFlashing seals at chimneys, valleys, skylights and abutments often causes leaks when it fails. We renew or repair lead, roll or mortar flashings as appropriate and re-point adjacent mortar joints to re-establish a reliable seal between the roof covering and vertical elements that pass through it.
ENQUIRE ABOUT THIS SERVICEROOF REPAIRS / VISUAL REFERENCE
Roof coverings, materials and surrounding details can all influence the scope of a repair. Here are a few general roofing references to accompany this guide.
Illustrative roofing photographs. They do not show or imply projects completed by Raptor in Highgate.
OUR PROCESS / FOUR STAGES
Needing a repair sets a clear sequence: inspect safely, diagnose the cause, agree a focused repair plan and complete the work to re-establish weatherproofing. We explain any access needs, potential additional trades and the post-work checks so you know what to expect; survey findings confirm scope and are provided in writing.
Reporting a leak or visible damage starts with photographs and a description, followed by a safe external and internal inspection where access allows. In the loft we trace damp stains and check timbers; externally we note slipped tiles, cracked slates and damaged flashings. When full access isn’t possible we explain the limits of what can be seen and how that affects the repair proposal.
Once we identify the cause we prepare a written repair plan that itemises the work, materials and any scaffold or access requirements. We outline whether related elements like gutters or fascias need attention and present options where more than one repair route exists, so you can choose a pragmatic balance between immediate cost and expected longevity.
During the repair we work from secure access points, replace or secure tiles and slates, renew flashings and repair any exposed underlay where necessary. If temporary waterproofing is needed we install it and follow with permanent repairs when conditions are safe. We keep you informed about any unforeseen issues discovered once work starts and agree changes before proceeding.
After completing repairs we inspect the affected areas to confirm the roof’s weatherproofing has been restored, clear debris and remove temporary coverings. We walk you through the work done, show photographs of repairs and explain any recommended routine checks to reduce the chance of recurrence.
WHY CHOOSE RAPTOR / WHAT MATTERS
Correct diagnosis and the right repair method prevent repeat failures. We identify the failure mechanism, use matching materials and carry out repairs from safe, compliant access so the fix restores continuous weatherproofing rather than concealing further issues.
A visible stain or slipped tile can hide other faults. We trace water paths in the loft and at junctions so repairs fix the source rather than just the symptom. That reduces the risk of repeat leaks and the need for follow-up work.
Using materials that suit the roof covering and junction details is essential. We source compatible tiles, slates and flashing materials and apply proven fitting methods to rebuild secure overlaps and seal points where water can enter.
Roof repairs involve working at height and handling heavy materials. We plan access, edge protection and safe working methods for each job and explain any scaffolding or safety measures needed so the work proceeds without unnecessary risk to people or property.
INSIGHT / Roof Repair Insight
Discovering a leak, a cracked tile or storm damage means the right repair stops immediate water ingress and reduces the chance of recurrence. Expect questions about where the water starts, what the supporting timbers show and whether temporary waterproofing is needed while a permanent fix is agreed.
ROOF COVERINGS / PHOTO REFERENCE General roofing reference image — not a verified Highgate project. Noticing damp patches on ceilings, staining that grows during wet weather or visible gaps where tiles meet flashings should trigger an inspection rather than guessing the cause. Water can travel along roof timbers so the internal symptom is not always where water enters; in the loft look for concentrated damp around joists or rafters and follow wet lines back toward ridges, valleys and abutments. Check chimneys, rooflights and pipe outlets for degraded seals or displaced flashing. For flat roofs, ponding water, soft spots or blistering membrane point to membrane failure or trapped moisture. Document what you see with photos and note when the problem is worst — during heavy rain, after wind or continuously — then share those details with us to speed diagnosis and avoid unnecessary exploratory work. Where the covering shows wider deterioration — many cracked or missing tiles, or sagging areas — repairs may be only part of the solution and a quoted plan should explain whether structural or covering renewal is likely to be needed.
Inspections commonly reveal slipped tiles, cracked slates, open ridge mortar and failed flashings at chimneys or abutments. Fixing a slipped tile is straightforward if the batten and underlay remain sound, but repeat slippage often indicates compromised fixings or underlay; in those cases we explain whether re-batting or partial replacement is sensible. Flashing failures usually present as leaks at junctions and can require replacement of leadwork, renewal of roll flashings or re-pointing. For storm damage, temporary waterproofing limits internal harm and creates time to agree a permanent fix. Always check whether a quoted job reinstates continuous weatherproofing or only addresses visible damage; the former avoids hidden routes for future leaks. Where neighbouring trades are needed — for example to replace rotten fascia, repair a chimney stack or make good internal plaster — we list those items separately so you can decide whether to include them now or later.
Costs reflect the cause, materials and access rather than an arbitrary charge. Replacing a handful of tiles uses fewer materials and less time than renewing multiple roof sections or re-batting. If scaffolding or edge protection is necessary, that adds to the practical cost because it ensures safe, thorough access. Weather affects when work can be completed safely, and in some cases a temporary measure will be sensible until conditions allow a full repair. When you request a quote, ask for an itemised list that separates labour, materials and any access provision so you can compare proposals fairly. Also ask what checks are included after completion and whether photographs will be provided of the repaired areas. If insurance is involved, we can supply the detailed report you need to support a claim, but you should check policy requirements before instructing work. Taking a measured approach — addressing the root cause and planning access clearly — avoids repeat visits and unexpected costs later.
AREAS WE SERVE
We carry out roof repairs for properties in Highgate. If you live nearby, send photos of the issue, your postcode and the best contact number and we’ll confirm whether we cover your address and advise the next step.
DISCUSS YOUR LOCATIONSTART THE CONVERSATION
Send us a few photographs and your postcode using the form, or give us a call. We will come back to you, arrange a survey where one is needed, and set out in writing what we recommend and why before any work is agreed.
QUESTIONS / ROOF REPAIRS & EMERGENCY ROOFING
Below are practical answers to frequent questions about diagnosing leaks, suitable repairs and what to expect on site. If you need specific advice, send photos and a postcode so we can suggest the right next step.
ASK ANOTHER QUESTIONWhere damage is limited to isolated tiles, flashings or a single leak source, a repair will often be the right course. If damage is widespread — many cracked or missing tiles, pervasive membrane failure or rotten supporting battens — replacement or larger-scale work may be the sensible option. We assess both the covering and the supporting components and explain which approach tackles the root cause rather than masking symptoms.
Major repairs need reasonably dry, calm conditions for safety and correct installation of materials. Where urgent leaks occur in poor weather we can install temporary weatherproofing to reduce internal damage and then follow up with a permanent repair when conditions permit. We’ll explain what temporary measures are practical and any limitations they carry.
We aim to match tiles, slates and flashing materials where possible, but exact matches depend on availability and the age of your roof. When a perfect match isn’t feasible we show you the closest options and how they will look once installed so you can approve the choice before work begins.
Removing moss and loose debris often helps reveal hidden damage and allows repairs to be installed correctly. If cleaning is necessary it’s usually done as part of the preparatory work so repairs proceed on a clear surface. Tell us if the roof is heavily covered so we can include cleaning in the repair schedule and quotation.
Access depends on roof pitch and the repair location. We may need a ladder with safe access, scaffold or edge protection for higher or steeper roofs. In the quote we state the access method required and explain how that affects the scope and cost. If scaffold is needed we describe how it will be sited to minimise disruption.
Homeowners can reduce immediate internal damage by moving valuables away from affected areas and placing buckets under leaks, but avoid walking on the roof or attempting repairs at height. For short-term external protection, a securely fixed tarp can limit ingress but must be installed safely. Contact us for guidance before attempting any external temporary work so you don’t create a hazard.
